AKOS 91526
9-bromo-9-phenylfluorene
CAS: 55135-66-5
Molecular Formula: C19H13Br
AKOS 91526 - Names and Identifiers
| Name | 9-bromo-9-phenylfluorene |
| Synonyms | NSC 28079 AKOS 91526 9-Bromo-9-phenylfuorene 9-BROMO-9-PHENYLFLUORENE 9-bromo-9-phenylfluorene 9-Phenylfluorenyl BroMide 1-bromo-9-phenyl-9H-fluorene 9-Bromo-9-phenyl-9H-fluorene 9-BROMO-9-PHENYL-9H-FLUORENE (9-Bromo-9H-fluoren-9-yl)benzene |
| CAS | 55135-66-5 |
| EINECS | 628-283-1 |
| InChI | InChI=1/C19H13Br/c20-17-12-6-11-16-14-9-4-5-10-15(14)18(19(16)17)13-7-2-1-3-8-13/h1-12,18H |
| InChIKey | HYQXNCDBSALQLB-UHFFFAOYSA-N |
AKOS 91526 - Physico-chemical Properties
| Molecular Formula | C19H13Br |
| Molar Mass | 321.21 |
| Density | 1.425±0.06 g/cm3(Predicted) |
| Melting Point | 99-101 °C (lit.) |
| Boling Point | 394.3±41.0 °C(Predicted) |
| Flash Point | 196°C |
| Water Solubility | Insoluble in water |
| Vapor Presure | 1.73E-06mmHg at 25°C |
| Appearance | powder to crystal |
| Color | Light orange to Yellow to Green |
| BRN | 2561445 |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.674 |
| MDL | MFCD00075522 |
| Use | This product is for scientific research only and shall not be used for other purposes. |
AKOS 91526 - Risk and Safety
| Hazard Symbols | C - Corrosive |
| Risk Codes | 34 - Causes burns |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S27 - Take off immediately all contaminated clothing. S28 - After contact with skin, wash immediately with plenty of soap-suds. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 3261 8/PG 2 |
| WGK Germany | 3 |
| HS Code | 29039930 |
| Hazard Class | 8 |
| Packing Group | II |
AKOS 91526 - Introduction
9-bromo-9-phenylfluorene(9-bromo-9-phenylfluorene) is an organic compound with the chemical formula C19H13Br. The following is a description of the properties, use, preparation and safety information of the compound:
Nature:
-Appearance: 9-bromo-9-phenylfluorene is a white crystalline solid.
-Melting point: Its melting point range is about 200-202 degrees Celsius.
-Solubility: Soluble in common organic solvents such as ethanol, dimethylformamide and dichloromethane.
Use:
- 9-bromo-9-phenylfluorene can be used as an intermediate in organic synthesis and used in the synthesis of other organic compounds.
-Due to its long life and high efficiency, it is also used as a light-emitting material for organic light-emitting diodes (OLED).
Preparation Method:
- 9-bromo-9-phenylfluorene can be prepared by the oxidative coupling reaction of benzene and brominated fluorene.
-Specifically, benzene and fluorene can be reacted in the presence of a copper (II) catalyst and oxygen, and then a brominating agent (such as bromine) can be added to react to obtain the target product.
Safety Information:
- 9-bromo-9-phenylfluorene has limited toxicity data, but as an organic bromine compound, it may have potential health hazards.
-Use should follow good laboratory practices and try to avoid contact with skin and eyes.
-Maintain good ventilation during use and use appropriate personal protective equipment (such as gloves, goggles, etc.).
-If the compound is swallowed or inhaled, seek immediate medical attention.
Nature:
-Appearance: 9-bromo-9-phenylfluorene is a white crystalline solid.
-Melting point: Its melting point range is about 200-202 degrees Celsius.
-Solubility: Soluble in common organic solvents such as ethanol, dimethylformamide and dichloromethane.
Use:
- 9-bromo-9-phenylfluorene can be used as an intermediate in organic synthesis and used in the synthesis of other organic compounds.
-Due to its long life and high efficiency, it is also used as a light-emitting material for organic light-emitting diodes (OLED).
Preparation Method:
- 9-bromo-9-phenylfluorene can be prepared by the oxidative coupling reaction of benzene and brominated fluorene.
-Specifically, benzene and fluorene can be reacted in the presence of a copper (II) catalyst and oxygen, and then a brominating agent (such as bromine) can be added to react to obtain the target product.
Safety Information:
- 9-bromo-9-phenylfluorene has limited toxicity data, but as an organic bromine compound, it may have potential health hazards.
-Use should follow good laboratory practices and try to avoid contact with skin and eyes.
-Maintain good ventilation during use and use appropriate personal protective equipment (such as gloves, goggles, etc.).
-If the compound is swallowed or inhaled, seek immediate medical attention.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: 9-Bromo-9-phenylfluorene Visit Supplier Webpage Request for quotation
CAS: 55135-66-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 55135-66-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 9-Bromo-9-phenylfluorene Visit Supplier Webpage Request for quotation
CAS: 55135-66-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 55135-66-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History